Contact Us
TEL : 86-572-2105696
Fax: 86-572-2105696
E-mail: irenepan@zjhuakaiwood.com
Address: ROOM305, No.13Building, Shanshuihuafu, Changxing Road, Huzhou, Zhejiang, China.
Home > News > Content
What Are The Types Of Wall Panels?
Mar 08, 2018

1. Solid wood

As the name implies, solid wood is made of wood made of wood. These plates are durable, the texture is natural, it is the choice of decoration. But because this kind of board material cost is high, and construction craft is required tall, use in decorating is not much. The solid plank is generally classified according to the material name of plank, there is no unified standard specification.

2, plywood,

Plywood, also known as plywood, in the row, commonly known as thin core board. A single board or laminated sheet with a thickness of three or more layers. It is the most commonly used material for making furniture by hand. The splint is generally divided into 3 mm, 5 mm, 9 mm, 12 mm, 15 mm and 18 mm 6 specifications (1 mm is 1mm).

3. Decorative panel

Decorative panels, commonly known as panels. It is to cut the solid wood to the thickness of 0.2mm thin wooden skin, with the splint as the base material, through the adhesive process to make the decorative plate with a single side decoration effect. It is the special way of the splint, the thickness is 3 mm. Decoration panel is a kind of advanced decoration material which is different from mixed oil.

4. Joinery board

Joinery board, commonly known as big core board. The large core board is made of two pieces of single board with the joint sticking together. The large core board is cheaper than the thin core board, and its vertical (in the direction of the core material) is poor in bending strength, but the transverse bending strength is high.

5. Chipboard.

The particleboard is made of wood scraps as the main raw material, reseeded with glue, and the additive is pressed into thin sheet. According to pressing method, it can be divided into extruded particleboard and planer type. The main advantage of such plates is that they are extremely cheap. Its drawbacks are also obvious: the intensity is extremely poor. Generally it is not suitable for the production of large or strong learning requirements of furniture.

6. Density board

Density board, also known as fiberboard. Is wood fiber or other plant fiber as raw materials, applying urea-formaldehyde resin or other applicable adhesive made from man-made plank, according to its density is different, divided into high density board, MDF, low density board. The density board is easy to be reprocessed due to its soft impact. Abroad, density board is a good type of wood for making furniture, but because of the country on a high standard of board several times less than those of the international standard, so the density board in our country, the use of quality remains to be improved.

7. Fire prevention board

Fire prevention board is to use the siliceous material or calcium as the main raw material, with a percentage of the fiber materials, light aggregate and binder, and chemical additive mix, after autoclaved technology made of decorative plates. It is a new type of material that is being used more and more, and its use is not only due to the fire prevention factor. The construction of fire prevention board is taller to the requirement that stickup glue, quality is better fire prevention board is more expensive than adornment panel also. The thickness of fire prevention board is generally 0.8mm, 1mm and 1.2mm.