Contact Us
TEL : 86-572-2105696
Fax: 86-572-2105696
Address: ROOM305, No.13Building, Shanshuihuafu, Changxing Road, Huzhou, Zhejiang, China.
Home > Knowledge > Content
Choose decorative veneer
Feb 03, 2018

Decorative veneer decoration nowadays family room decoration commonly used decorative materials.


1, recognize the difference between man-made veneer veneer veneer veneer and natural veneer: The former texture is basically straight texture,

The texture pattern is regular; while the latter is a natural wood pattern, the natural pattern of the texture is relatively large and irregular.

2, good decorative: Decorative plate appearance should have a better sense of beauty, material uniform, clear color, beautiful wood grain. With the board and parquet texture should be arranged according to a certain law, similar to the color of wood, patchwork and edge almost parallel.


3, the surface should be no obvious flaws: the choice of the decorative plate surface should be smooth, no burrs, hook marks and planing marks; should not gel phenomenon (such as local black, yellow phenomenon); should try to pick the surface without cracks, cracks, No cap, resin capsule and gum channel; the natural warpage of the whole board should be as small as possible to avoid sanding through the substrate caused by sand leakage phenomenon.


4, the structure of the adhesive layer is stable, no open plastic phenomenon: It should be noted that between the veneer and the substrate surface, the inner layer of the substrate can not be between the drum, stratification.


5, knife pry test glue strength: This method is the most intuitive way to test the bonding strength. With a sharp flat blade pry along the glue layer, if the glue layer cracking and wood damage, indicating poor bonding strength.


6, to choose the formaldehyde emission of low sheet: Selection should avoid irritating odor decorative plate. Because the greater the smell, indicating that the higher the amount of formaldehyde emissions, the more serious pollution, the greater the danger.


7, choose a clear product manufacturers: the vast majority of clear factory name, site, trademark of the product, the performance is more reliable.

Previous: Decorative panel fade

Next: Wood Veneer Plywood